Polymer-modified bitumen is used to combat different pavement distresses and to increase the life span of pavement. Unmodified bitumen cannot perform better with the range extreme minimum and maximum pavement temperatures. The polymers commonly used to modify the bitumen are ethylene vinyl acetate (EVA) styrene butadiene styrene (SBS). The aim this study to compare the performance of EVA modifi...

This study is carried out to explore the effect of nano materials (SiO2 & TiO2) on the physical and rheological properties of Bitumen. To achieve this goal, Nano materials are blended in bitumen in various percentages (0.3, 0.6, 0.9 and 1.2%). The physical and rheological properties of modified binders are characterized using a penetration, softening point, kinematic viscosity and a dynamic...

One of the important factors of cracks on the asphalt pavements is bitumen aging that associated with the loss of volatile components and oxidation of asphalt binder. This paper is about effect of Styrene-Butadiene-Styrene (SBS) polymer on asphalt aging In order to decrease asphalt aging effects. For this purpose samples of base bitumen and SBS modified bitumen aged according to the rolling thi...

Layered double hydroxides (LDHs) are an ultraviolet-light (UV) resistant material. In this study, LDHs were used to modify bitumen. The optical and UV aging properties of LDHs modified bitumen were investigated. Firstly, the thin films of bitumen, with and without LDHs, were prepared. By using the UV-Vis spectrophotometer, absorbance, reflectance, and transmittance of bituminous thin film were ...

Abstract—In order to use bitumen in hot mix asphalt, it must have specific characteristics. There are some methods to reach these properties. Using polymer modifiers are one of the methods to modify the bitumen properties. In this paper the effect of StyreneButadiene-Rubber that is one of the bitumen polymer modifiers on rheology properties of bitumen is studied. In this regard, the rheological...

SBS (styrene-butadiene-styrene block copolymer) modified bitumen is one of most widely used polymer modified bitumens in China. It is also not satisfactory when subjected to extreme conditions. Multiple-walled carbon nanotubes, as a type of advanced nanomaterial, are investigated extensively because of their strong adsorption capacity. Little research has been done about MWCNTs/SBS modified bit...

with respect to the physical and mechanical limited qualities of bitumen, it benefits from certain specificability in application and its life service. polymers as the most important modifiers of bitumen are applied to it in order to improve its functional efficiency. among various polymers, styrene-butadiene- styrene (sbs) is the best modifier of the bitumen. in this work, sbs polymer as one o...

In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

Over the recent years, bitumen modification with polymers, acids, or mineral fillers has gained relevance to adjust its performance properties. This work reports the use of polyphosphoric acid (PPA) for the modification of formulated bitumen. With this objective, an in-depth literature review on PPA modification was firstly performed. Subsequently, five individual refinery components were selec...

Polymer-modified bitumen emulsions present a safer and more environmentally friendly binder for enhancing the properties of roads. Cationic bitumen emulsion binders containing polymer latex were investigated using confocal laser scanning microscopy. The latex was incorporated into the bitumen emulsion by using four different addition methods and all emulsions were processed with a conventional ...